9LED Dental Oral Operation Lamp Induction Sensor Light LED for Dental Unit

DenshineSKU: 620000195448-4919

Option1: Lamp interface 26mm
Price:
$648.47

Description

Description
1. Intended Use The item is used for the diagnose , cure and operation of the medicine department .

2. General Introduction Products structure and components

3. Environmental Requirement:
Storage Transportation Environment : Temperature : -20 ° C - 70 ° C
Relative Humidity : 10 % -90 %
Service Environment : 50 -45 ° C
Relative Humidity : 10 % -90 %
Atmospheric Pressure :500-1060hpa

4.Specification :
Input Voltage : a.c.12-24V
Frequency :50 / 60Hz
Power :28W
Illumination : 8000--23000LUX
Color Temperature :4000-5000 K can be adjustable , single yellow light : 3000K
Spot Size :70X140mm ( Distance for 700mm )
Control Method : Induction Switch , 8 grade Illumination can be adjusted .

5. Control Method:
A ) Color Temperature Setting : Press " M " bottom , “ The " CT : 5000K ” on the screen is flashing . Then press A " or " V " . il to set the temperature of the white light , and then press " M " bottom to finish the settin : of color temperature is from 4000K --- 5000K.
B ) Luminance Setting : Press " M " bottom , when “ Li : ... ” is flashing , press “ A ” or “ " to set the luminance .
C ) To open or close by induction : To control the ON / OFF if the white light by crossing the sensor from the 50-120 mm distance .
D ) To control the illumination by induction : When led dental lamp is lighting , put the hand on the above of the sensor by a 50-120mm distance the light can be changed from dark to bright . When move the hand away , the illumination will remain . 8 grade Illumination can be adjusted .
E ) Yellow light Setting : As Picture 1 shown , Press “ V ” button for one second , Color Temperature can be adjusted to 3000K , which is convenient for filling with resin when doctor's using , then output light turn into yellow light.Press “ V ” button again , Color temperature for 3000K return to the original color temperature .

6、 Washing and Sterilization
The transparent lens of the LED dental lamp can be scrubbed and cleaned by the lens paper . The cashing and handle can be washed by neutral cleaning fluid , alcohol and disinfectant .

7、Installing Instruction
To connect the plug of the led dental lamp and arm , tightening the led dental lamp and arm by M5 screw , then connect the arm to the AC12V power of the dental chair .
8.Weight
Lamp net weight: 2.05kg


Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed