Implant Torque Wrench With Drivers Control Hex

DenshineSKU: 620000220523-5929

Option1: 1pc


Dental Universal Implant Torque Wrench With Drivers Control Hex Anthogyr Fit Dental teeth Implant Torque Wrench

Name:Dental teeth Implant Torque Wrench


1. Top The Top of dihedral screw
2. Spring Lock, the spring lock tools for removing screwers
3. The top part(handle part) and the main body part are freely detachable
4. Hold the handle stably
5. Torque selection Torque setting 5-35n/cm

Expected usage:

Used for dental implantation process.

Instructions for use:

1. Open the packing box, take out the wrench for dental implants, and check whether there is any damage, cracking or rust.

2.Choose the matching screwdriver and install it, select the appropriate torque value, and turn it clockwise. Until it clicks, when    you need to unscrew it, turn it counterclockwise.

3. The instruments should be cleaned, disinfected and sterilized before and after use.


1. Precision instrument equipped with a torque adjustment system for screwing prosthetic components
2. 7 torque levels (5 to 35 and universal connection of the prosthetic mandrels
3. Micro head and ergonomic handle
4. Reduced amplitude of movement compared with tightening using a ratchet wrench
5. Only 160g for a better freedom of movement
6. Universal torque wrench, recommended with most type of implants
7. 135°C Autoclavable

Drivers:(shank diameter 2.35mm)

The success of the implant treatment depends on the precise tightening of the parts placed directly on the implant.
A pre-stressed tightening of the screw will help avoid any risk of screw loosening.Also, high tightening torques may lead to screw fracture.A calibrated tightening can only be guaranteed through the use of a precision instrument offering a torque control system.
The dynamometric manual wrench has been specially designed to meet those requirements.

Operating conditions

Environment Temperature : +10℃~+40℃
Environment relative humidity : ≤95%;
Air pressure : 860hPa~1060hPa;

Transport and Storage conditions
Environment Temperature: -25℃~+60℃;
Environment relative humidity : 10%~93%;
Air pressure : 860hPa~1060hPa;

[Cleaning and disinfection methods and operation items]

1. Basic requirements for product preparation and handling.

1.1 Alkaline or PH neutral detergent can be used.

1.2 Water quality in accordance with DIN EN 285 Annex B.

1.3 Sterilizers complying with DIN EN 285 or DIN EN 13060.

1.4 Cleaning and disinfection equipment in accordance with DIN EN ISO15883 Part 1 and 2.

1.5 The cleaning/disinfection/sterilization process only uses fully confirmed methods and equipment, and the manufacturer’s   instructions and ecommendations must be followed.

In addition, it is necessary to comply with effective domestic hygiene regulations. Especially the fire-fighting prions of different

2. Preparation for cleaning/disinfection

2.1 Immediately remove the residues during use.

2.2 Do not use metal brushes or steel wool.

2.3 Do not place in sodium chloride salt solution.

2.4 Wet treatment: 1 hour.

2.5 Dry treatment: 3 hours.

3. Manual cleaning and disinfection

3.1 Machine cleaning and disinfection should be better than manual cleaning and disinfection.

3.2 When the machine is not available or under other special conditions, manual cleaning and disinfection can be used.

In this case, the user is responsible for the specific cleaning and disinfection process and confirmation of the effect.

3.3 Do not use metal brushes or steel wool.

3.4 Special attention should be paid when cleaning instruments with small inner diameters.

4. Ultrasonic cleaning

4.1 Temperature: Clean at room temperature without heating.

4.2 Frequency 35-45KHZ

4.3 Cleaning time 4-5 minutes

4.4 Please be sure to open the joint joints of joint instruments before performing ultrasonic cleaning.

5. Machine cleaning and thermal disinfection.

5.1 Machine cleaning/thermal disinfection should be given priority.

5.2 Do not put the instrument under low voltage, open the joint joint of the joint instrument.


Wrench Body *1pc
Spare Latch Type Head *1pc
Drivers *12pcs

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed